General Spectrometer Accessories
Perkin Elmer US LLC Alumina Injector, 1.2 mm I.D. - Entire Length of Tube, for Avio
This Alumina Injector is for use with Avio 200/500 ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.
Glass Expansion Sapphire Injector 2.0mm
Sapphire Injector with 2.0mm ID. 2.0mm ID sapphire injector (N0775247). This Sapphire Injector is for use with Optima 2x00/4x00/5x00/7x00 DV ICP-OES series instruments. Sapphire injectors are ideal for silicon applications.PerkinElmer Optima 2x00/4x00/5x00/7x00 DV ICP-OES series Injectors - Compatible with 50-190-7006 (30-808-0845), 50-190-7010 (30-808-1122), 50-190-7019 (30-808-1470), 50-190-7022 (30-808-2926), 50-904-7597 (N0772005), 50-904-3780 (N0770338, PG31016), 50-904-3781 (N0770344).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Outer Tube for D-Torch
Quartz Outer Tube for D-Torch. Compatible with Agilent (Varian) 700-ES Sereis Axial, Vista Axial ICP-OES D-Torch (30-808-2919, 501907021). The D-Torch, provides a robust and high-performing alternative to both single-piece and semi-demountable quartz torches, ensuring greater robustness & a lower cost of ownership. With the D-Torch design, the analyst most often replaces only the outer tube, rather than replacing the entire torch or a quartz torch body.When not in use, clean as per recommended guidelines, & store in original box.If analyzing high salt, fusions, wear metals in oil, hydrofluoric acid (HF) or volatile organics, we recommend the ceramic outer tube P/N 501907173, which does not devitrify or crack from thermal shock, like quartz. Compared to quartz outer tubes, the ceramic alternative has an extended lifespan, significantly reducing maintenance, cleaning, and downtime caused by torch failure.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Platinum Sampler Cone for PerkinElmer Elan 6000/9000/DRCII/DRC-E (WE027802)
Platinum Sampler Cone (WE027802) ¿ For PerkinElmer Elan 6000/9000/DRCII/DRC-E ICP-MS. Suitable for most applications, including corrosive samples (e.g., routine aqueous environmental samples, >5% acid matrix, HF, organic). Although the highest cost option, it is typically the most durable, longest-lasting, and because it runs hotter it requires less frequent cleaning. Replace sampler cone O-ring if brittle, cracked or damaged (NC1585741). Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection.For routine samples, we recommend Nickel Sampler Cones, see catalog number NC1585739.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Platinum Jet Sampler Cone for Thermo Scientific Element 1/Element 2/Neptune ICP-MS (1313360, BRE0010792)
Platinum Jet Sampler Cone, (1313360, BRE0010792) ¿ Suitable for Thermo Element 1, 2 & Neptune ICP-MS. Ideal for high sensitivity applpications for low matrix containing samples. Use a new Graphite Sampler Cone Gasket (501907717) each time the cone is re-installed, even if it¿s the same cone. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection.For lowest copper background we recommend a Nickel Sampler Cone, see catalog number 501907704.For high sensitivity applications for low matrix containing samples, we recommend Nickel Jet Sampler Cone, see catalog number 501907709. For standard operation using Nickel Sampler with Copper Core, see catalog number 501907705.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End Viton Pump Tube 2tag, 127mm spacing, 2.79mm ID, Purple/White (PKT 6)
Contour Flared End Viton Pump Tube 2tag, 127mm spacing, 2.79mm ID Purple/White (PKT 6).Tag Colors: Purple/WhiteID mm: 2.79Wall Thickness mm: 0.85OD mm 4.49Overall Length: 175mm (127mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Fluoropolymer elastomerSpecial Properties: Special tubing for concentrated acids and corrosive solventsMaterial: Made from Fluran HC F-5500-A or equivalent.Limitations: Limited service lifeGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Injector Ferrule for D-Torch
Injector Ferrule for D-Torch. Compatible with Glass Expansion’s D-Torch for Horiba JY (30-808-2882).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Alumina Injector, 2.0 mm I.D. for Avio
This Alumina Injector is for use with Avio 200/500 ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.
Perkin Elmer US LLC Quartz Baffled Cyclonic Spray Chamber without Gas Port for ELAN 5000/6x00/9000/DRCs PC3 Systems
The quartz baffled cyclonic spray chamber features a 7 mm baffle and auxiliary gas port. It's designed for all-purpose, non-hydrofluoric acid resistant applications and provides excellent sensitivity and stability with low background.
Glass Expansion Nickel Sampler Cone with Copper Core for Thermo Scientific Element 1/Element 2/Neptune/Neoma ICP-MS (1044530)
Nickel Sampler Cone with Copper Core (1044530) ¿ Standard sampler cone for Thermo/Finnigan Neoma MC-ICP-MS and Element 1, 2 & Neptune. Suitable for most common applications (e.g., routine aqueous samples, <5% acid matrix, non-HF, non-organic). Not recommended for samples containing hydrofluoric acid (HF). Use a new Graphite Sampler Cone Gasket (501907717) each time the cone is re-installed, even if it¿s the same cone. Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection.For lowest boron background and semiconductor applications, we recommend a platinum cone, see catalog number 501907711.For high sensitivity applications and low matrix containing samples, we reccommend Nickel Jet Sampler, see catalog number 501907709.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End Viton Pump Tube 2tag, 127mm spacing, 1.30mm ID, Grey/Grey (PKT 6)
Contour Flared End Viton Pump Tube 2tag, 127mm spacing, 1.30mm ID Gray/Gray (PKT 6).Tag Colors: Gray/GrayID mm: 1.30Wall Thickness mm: 0.90OD mm 3.10Overall Length: 175mm (127mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Fluoropolymer elastomerSpecial Properties: Special tubing for concentrated acids and corrosive solventsMaterial: Made from Fluran HC F-5500-A or equivalent.Limitations: Limited service lifeGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion DuraMist DC Nebulizer 0.4mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1070 Gas Fitting with Ratchet Nebulizer connector
DuraMist DC Nebulizer 0.4mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 21 with ratchet connector (1 pc). Compatible with Perkin Elmer Optima ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min & sample flow rate is 0.4mL/min. Recommended not to exceed optimum 0.4mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. DuraMist is an economical inert nebulizer for high-precision analysis & the highest tolerance to TDS, up to 30%. Made from PEEK, it tolerates up to 5% HF.Replacement parts include P/Ns 502702959 and 70-803-1070.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End PVC Pump Tube 3tag, 72mm spacing, 0.76mm ID, Black/Black (PKT 6)
Contour Flared End PVC Pump Tube 3tag 0.76mm ID Black/Black (PKT 6).Tag Colors: Black/BlackID mm: 0.76Wall Thickness mm: 0.86OD mm 2.48Overall Length: 455mm (72mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Quartz 3-Point Bending System Probes for DMA 7/DMA 7e and TMA 7, 0.5mm radius spherical tip
Penetration and Compression: Narrow tip compression probes are available for penetration measurements. A broad tip compression probe permits the determination of the compressive modulus and additional properties of soft rubber materials. Part of Quartz 3-Point Bending Systems P/N N5390137 and P/N N5390136.